General Plastics Single Station Forming
The Single Station Forming approach is an ideal solution for low-volume parts of a wide range of sizes, with capabilities for both pressure and vacuum forming.
The single station forming is well adapted to cellular manufacturing with the ability of mobile secondary equipment.
The possibility exists for short setup times and cost-effective production.
- Piece sizes run from 12” x 12” to 60” x 120” x 40”
- True pressure forming up to 100 PSI with locking bayonet platens with airbag assist.
- Material gauges run from 0.030” to 0.500” thick
- State-of-the-art equipment
- Digital Controls
- Quartz Heaters